ABSTRACTIn this study, the effect of local heating on the weld line formation in a plastic injection mold was studied by using acrylonitrile butadiene styrene (ABS) and polypropylene 20 glass fiber (PP GF20) plastic material. An aluminum 6000 insert was fitted into the injection mold to set temperatures for local heating. The three parameters with three levels were selected for injection molding process parameters as insert temperature, mold temperature, and melt temperature and to produce mechanical tests specimens with weld lines and non-weld lines. L9 orthogonal array was arranged for the Taguchi method.To verify the mold design, plastic injection molding simulation software Moldex3D was implemented for plastic filling analysis. The tensile and bending test results for specimens were analyzed by using the statistics package Minitab 19.1.ÖZETBu çalışmada, plastik enjeksiyon kalıbında lokal ısıtmanın birleşme izi oluşumu üzerindeki etkisini akrilonitril bütadien stiren (ABS) ve polipropilen 20 cam elyaf (PP GF20) plastik malzemesi kullanılarak incelenmiştir. Yerel ısıtma için sıcaklıkları ayarlamak üzere enjeksiyon kalıbına bir alüminyum 6000 serisi insert parçası yerleştirildi. Enjeksiyon kalıplama proses parametreleri için insert sıcaklığı, kalıp sıcaklığı ve eriyik sıcaklığı olarak üç seviyeli üç parametre seçildi ve birleşme izi ve birleşme izi olmayan mekanik test numuneleri üretildi. Taguchi yöntemi için L9 ortogonal dizisi düzenlenmiştir.Kalıp tasarımını doğrulamak için, plastik enjeksiyon kalıplama simülasyon yazılımı Moldex3D programında plastik dolum analizi uygulanmıştır. Numuneler için çekme ve eğilme test sonuçları Minitab 19.1 istatistik programı kullanılarak analiz edildi.
Eser Adı (dc.title) | The effect of local heating on the weld line formation in plastic ınjection molding of acrylonitrile butadiene styrene and glass fiber reinforced polypropylene Akrilonitril bütadien stiren ve cam elyaf takviyeli polipropilenin plastik enjeksiyon kalıplamasında lokal ısıtmanın birleşme izi oluşumuna etkisi |
Eser Sahibi (dc.contributor.author) | Güler, Muhsin Deniz |
Tez Danışmanı (dc.contributor.advisor) | Aydın Ülker |
Yayıncı (dc.publisher) | Graduate School of Natural and Applied Sciences |
Tür (dc.type) | Yüksek Lisans |
Açıklama (dc.description) | xix, 116 pages |
Açıklama (dc.description) | 29 cm. 1 CD |
Özet (dc.description.abstract) | ABSTRACTIn this study, the effect of local heating on the weld line formation in a plastic injection mold was studied by using acrylonitrile butadiene styrene (ABS) and polypropylene 20 glass fiber (PP GF20) plastic material. An aluminum 6000 insert was fitted into the injection mold to set temperatures for local heating. The three parameters with three levels were selected for injection molding process parameters as insert temperature, mold temperature, and melt temperature and to produce mechanical tests specimens with weld lines and non-weld lines. L9 orthogonal array was arranged for the Taguchi method.To verify the mold design, plastic injection molding simulation software Moldex3D was implemented for plastic filling analysis. The tensile and bending test results for specimens were analyzed by using the statistics package Minitab 19.1.ÖZETBu çalışmada, plastik enjeksiyon kalıbında lokal ısıtmanın birleşme izi oluşumu üzerindeki etkisini akrilonitril bütadien stiren (ABS) ve polipropilen 20 cam elyaf (PP GF20) plastik malzemesi kullanılarak incelenmiştir. Yerel ısıtma için sıcaklıkları ayarlamak üzere enjeksiyon kalıbına bir alüminyum 6000 serisi insert parçası yerleştirildi. Enjeksiyon kalıplama proses parametreleri için insert sıcaklığı, kalıp sıcaklığı ve eriyik sıcaklığı olarak üç seviyeli üç parametre seçildi ve birleşme izi ve birleşme izi olmayan mekanik test numuneleri üretildi. Taguchi yöntemi için L9 ortogonal dizisi düzenlenmiştir.Kalıp tasarımını doğrulamak için, plastik enjeksiyon kalıplama simülasyon yazılımı Moldex3D programında plastik dolum analizi uygulanmıştır. Numuneler için çekme ve eğilme test sonuçları Minitab 19.1 istatistik programı kullanılarak analiz edildi. |
Kayıt Giriş Tarihi (dc.date.accessioned) | 04.11.2022 |
Açık Erişim Tarihi (dc.date.available) | 2022-11-04 |
Yayın Tarihi (dc.date.issued) | 2022 |
Yayın Dili (dc.language.iso) | eng |
Konu Başlıkları (dc.subject) | Plastik enjeksiyon |
Konu Başlıkları (dc.subject) | Plastik - Kalıplama |
Tek Biçim Adres (dc.identifier.uri) | https://hdl.handle.net/11469/3129 |