Objective
We evaluated the detachment force, amount of deformation, fracture mode, and pull-out force of 3 different wires used for bonded lingual retainer fabrication.
Methods
We tested 0.0215-inch five-stranded wire (PentaOne, Masel; group I), 0.016 × 0.022-inch dead-soft eight-braided wire (Bond-A-Braid, Reliance; group II), and 0.0195-inch dead-soft coaxial wire (Respond, Ormco; group III). To test detachment force, deformation, and fracture mode, we embedded 94 lower incisor teeth in acrylic blocks in pairs. Retainer wires were bonded to the teeth and vertically directed force was applied to the wire. To test pull-out force, wires were embedded in composite that was placed in a hole at the center of an acrylic block. Tensile force was applied along the long axis of the wire.
Results
Detachment force and mode of fracture were not different between groups. Deformation was significantly higher in groups II and III than in group I (p < 0.001). Mean pull-out force was significantly higher for group I compared to groups II and III (p < 0.001).
Conclusions
Detachment force and fracture mode were similar for all wires, but greater deformations were seen in dead-soft wires. Wire pull-out force was significantly higher for five-stranded coaxial wire than for the other wires tested. Five-stranded coaxial wires are suggested for use in bonded lingual retainers.
Eser ady (dc.title) | Comparison of three different orthodontic wires for bonded lingual retainer fabrication |
Eser Sahibi (dc.contributor.author) | ASLI BAYSAL |
Neşir senesi (dc.date.issued) | 2012 |
Diğer Yazarlar (dc.contributor.authors) | TANCAN UYSAL |
Diğer Yazarlar (dc.contributor.authors) | NİSA GÜL |
Diğer Yazarlar (dc.contributor.authors) | MELİKE BÜŞRA ALAN |
Diğer Yazarlar (dc.contributor.authors) | SABRİ İLHAN RAMOĞLU |
Publisher (dc.publisher) | The Korean Association of Orthodontists |
Görnüş (dc.type) | Makale |
Gysga Maglumat (dc.description.abstract) | Objective We evaluated the detachment force, amount of deformation, fracture mode, and pull-out force of 3 different wires used for bonded lingual retainer fabrication. Methods We tested 0.0215-inch five-stranded wire (PentaOne, Masel; group I), 0.016 × 0.022-inch dead-soft eight-braided wire (Bond-A-Braid, Reliance; group II), and 0.0195-inch dead-soft coaxial wire (Respond, Ormco; group III). To test detachment force, deformation, and fracture mode, we embedded 94 lower incisor teeth in acrylic blocks in pairs. Retainer wires were bonded to the teeth and vertically directed force was applied to the wire. To test pull-out force, wires were embedded in composite that was placed in a hole at the center of an acrylic block. Tensile force was applied along the long axis of the wire. Results Detachment force and mode of fracture were not different between groups. Deformation was significantly higher in groups II and III than in group I (p < 0.001). Mean pull-out force was significantly higher for group I compared to groups II and III (p < 0.001). Conclusions Detachment force and fracture mode were similar for all wires, but greater deformations were seen in dead-soft wires. Wire pull-out force was significantly higher for five-stranded coaxial wire than for the other wires tested. Five-stranded coaxial wires are suggested for use in bonded lingual retainers. |
Täzelenenç Düzümleniş Senesi (dc.date.accessioned) | 09.06.2014 |
Açık Erişim Tarihi (dc.date.available) | 2014-06-09 |
Yayın Dili (dc.language.iso) | eng |
Konu Başlıkları (dc.subject) | Wire |
Konu Başlıkları (dc.subject) | Bonding and aligner |
Atıf için Künye (dc.identifier.citation) | Uysal, T., Gül, N., Alan, M.B., Ramoglu, S.I. (2012). Comparison of three different orthodontic wires for bonded lingual retainer fabrication. Korean J Orthodontics, 42 (1), 39-46. http://dx.doi.org/10.4041/kjod.2012.42.1.39 |
ISSN (dc.identifier.issn) | 2005-372X |
Yayının ilk sayfa sayısı (dc.identifier.startpage) | 39 |
Yayının son sayfa sayısı (dc.identifier.endpage) | 46 |
Dergi Sayısı (dc.identifier.issue) | 1 |
Dergi Cilt (dc.identifier.volume) | 42 |
Haklar (dc.rights) | Open access |
Iňleýin Görnüşli Salgysy (dc.identifier.uri) | Http://hdl.handle.net/11469/122 |