MEHMET İRFAN KARADEDE

Kitap | 2021 | İzmir Kâtip Çelebi Üniversitesi

Kaynakça var.

ASLI BAYSAL |

Makale | 2012 | The Korean Association of Orthodontists

Objective We evaluated the detachment force, amount of deformation, fracture mode, and pull-out force of 3 different wires used for bonded lingual retainer fabrication. Methods We tested 0.0215-inch five-stranded wire (PentaOne, Masel; group I), 0.016 × 0.022-inch dead-soft eight-braided wire (Bond-A-Braid, Reliance; group II), and 0.0195-inch dead-soft coaxial wire (Respond, Ormco; group III). To test detachment force, deformation, and fracture mode, we embedded 94 lower incisor teeth in acrylic blocks in pairs. Retainer wires were bonded to the teeth and vertically directed force was applied to the wire. To test pull-out forc . . .e, wires were embedded in composite that was placed in a hole at the center of an acrylic block. Tensile force was applied along the long axis of the wire. Results Detachment force and mode of fracture were not different between groups. Deformation was significantly higher in groups II and III than in group I (p < 0.001). Mean pull-out force was significantly higher for group I compared to groups II and III (p < 0.001). Conclusions Detachment force and fracture mode were similar for all wires, but greater deformations were seen in dead-soft wires. Wire pull-out force was significantly higher for five-stranded coaxial wire than for the other wires tested. Five-stranded coaxial wires are suggested for use in bonded lingual retainers Daha fazlası Daha az

ASLI BAYSAL | İLKNUR VELİ | MEHMET İRFAN KARADEDE

Makale | 2013 | The Korean Association of Orthodontists

Objective: To evaluate the changes in cortical bone thickness, alveolar bone height, and the incidence of dehiscence and fenestration in the surrounding alveolar bone of posterior teeth after rapid maxillary expansion (RME) treatment using cone-beam computed tomography (CBCT). Methods: The CBCT records of 20 subjects (9 boys, mean age: 13.97 ± 1.17 years; 11 girls, mean age: 13.53 ± 2.12 year) that underwent RME were selected from the archives. CBCT scans had been taken before (T1) and after (T2) the RME. Moreover, 10 of the subjects had 6-month retention (T3) records. We used the CBCT data to evaluate the buccal and . . . palatal aspects of the canines, first and second premolars, and the first molars at 3 vertical levels. The cortical bone thickness and alveolar bone height at T1 and T2 were evaluated with the paired-samples t-test or the Wilcoxon signed-rank test. Repeated measure ANOVA or the Friedman test was used to evaluate the statistical significance at T1, T2, and T3. Statistical significance was set at p < 0.05. Results: The buccal cortical bone thickness decreased gradually from baseline to the end of the retention period. After expansion, the buccal alveolar bone height was reduced significantly; however, this change was not statistically significant after the 6-month retention period. During the course of the treatment, the incidence of dehiscence and fenestration increased and decreased, respectively. Conclusions: RME may have detrimental effects on the supporting alveolar bone, since the thickness and height of the buccal alveolar bone decreased during the retention period Daha fazlası Daha az

ASLI BAYSAL |

Makale | 2013 | The Korean Association of Orthodontists

Objective: To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. Methods: CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal–Wallis, and Dunn post-hoc tests were performed for statistical comparisons. Results: Labial alveolar bone thickness was significantly higher in Cl . . .ass I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). Conclusions: Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients Daha fazlası Daha az

ASLI BAYSAL

Kitap Bölümü | 2011 | InTech

The human body consists of different systems which include the nervous system, the cardiovascular system, the musculoskeletal system, etc. Each system performs some kind of vital task and carries on many physiological processes. For example, the primary functions of the musculoskeletal system can be summarized as generating forces, producing motion, moving substance within the body, providing stabilization, and generating heat. Physiological processes are multifaceted fact and most of them manifest themselves as signals that reflect their nature and activities. These types of signals may be hormonal, physical or electrical. The gene . . .ral name of the electrical signals taken from the related organ or physiologic process with invasive or non-invasive methods is called Biomedical Signals. This signal is normally a function of time and is definable in terms of its amplitude, frequency and phase (Rangayyan, 2002). The electromyography (EMG) signal is a biomedical signal that detects the electrical potential generated by muscle cells when these cells contract, and also when the cells are at rest. Three types of muscle tissue can be identified. One of them is the skeletal muscle, and the others are the smooth muscle and the cardiac muscle. The EMG is applied to the study of skeletal muscle (Reaz et al., 2006). Skeletal muscles are comprised by nearly parallel cells and the muscle fibers which constitute the contractile structural units. Muscle fibers are activated by the central nervous system through electrical signals transmitted by motoneurons. A single motoneuron together with the muscle fibers that it contacts is called a motor unit which is the smallest functional subdivision of the neuromuscular system (Moritani, et al. 2004) The central nervous system controls the activation of motor units to optimize the interaction between our body and the surrounding environment. When the motor units are activated by the central nervous system, they produce an action potential trains of the active motor units add together to generate the interference EMG signal. Surface and needle electrodes have been used to detect EMG of muscles. Surface electrodes have been widely used to investigate neuromuscular functions because of their several advantages, for example, it is noninvasive, easy to adhere to the skin and to detect the total activities of the muscle and it was called Surface EMG (SEMG). Bu the real advantage of this technique is that it is more beneficial in studies, in which simultaneous movement of many muscles is examined in vast muscle groups. On the other hand, surface electrodes have disadvantages as well. Due to the broad area for receiving signals on respective muscl Daha fazlası Daha az

İLKNUR VELİ

Makale | 2012 | American Association of Orthodontists

INTRODUCTION: The aim of this study was to test the null hypothesis that increased irregularity of the mandibular incisors is associated with a reduction in the alveolar support on cone-beam computed tomographic sections. METHODS: From a sample of 1100 digital volumetric tomographs, 125 tomographs of subjects with Class I malocclusion (mean age, 21.6 ± 4.8 years) were selected for this study. An irregularity index was used to categorize these tomographs as having mild, moderate, or severe crowding. All tomographs were taken by using an iCAT (Imaging Sciences International, Hatfield, Pa) imaging device. The following parameters we . . .re measured on the sections corresponding to the 4 mandibular incisors with the iCAT software: height, thickness, and area of the entire symphysis; height, thickness, and area of the cancellous bone of the symphysis; and distance between the vestibular and lingual cortices. For the statistical evaluation, independent samples t test, analysis of variance, and the Tukey HSD test were used at an alpha level 0.05. The Pearson correlation coefficient and a simple linear regression were calculated to determine the relationship between mandibular anterior bony support and incisor crowding. RESULTS: Almost all mandibular anterior bone measurements were greater in the male subjects than in the female subjects (height of the mandibular symphysis, P Daha fazlası Daha az

TANCAN UYSAL

Makale | 2005 | The E. H. Angle Education and Research Foundation

The aim of this study was to compare the transverse dimensions of the dental arches and alveolar arches in the canine, premolar, and molar regions of Class II division 1 and Class II division 2 malocclusion groups with normal occlusion subjects. This study was performed using measurements on dental casts of 150 normal occlusion (mean age: 21.6 6 2.6 years), 106 Class II division 1 (mean age: 17.2 6 2.4 years), and 108 Class II division 2 (mean age: 18.5 6 2.9 years) malocclusion subjects. Independent-samples t-test was applied for comparisons of the groups. These findings indicate that the maxillary interpremolar width, maxill . . .ary canine, premolar and molar alveolar widths, and mandibular premolar and molar alveolar widths were significantly narrower in subjects with Class II division 1 malocclusion than in the normal occlusion sample. The maxillary interpremolar width, canine and premolar alveolar widths, and all mandibular alveolar widths were significantly narrower in the Class II division 2 group than in the normal occlusion sample. The mandibular intercanine and interpremolar widths were narrower and the maxillary intermolar width measurement was larger in the Class II division 2 subjects when compared with the Class II division 1 subjects. Maxillary molar teeth in subjects with Class II division 1 malocclusions tend to incline to the buccal to compensate the insufficient alveolar base. For that reason, rapid maxillary expansion rather than slow expansion may be considered before or during the treatment of Class II division 1 patients Daha fazlası Daha az

ASLI BAYSAL

Makale | 2013 | European Orthodontic Society

tablo bulunmakta

İLKNUR VELİ

Makale | 2011 | The E. H. Angle Education and Research Foundation

Objective: To test the hypotheses that (1) there is no difference in mandibular asymmetry between the crossbite and normal side in a unilateral crossbite group (UCG) and between the right and left sides in a bilateral crossbite group (BCG) and a control group (CG); and (2) there is no significant difference in mandibular asymmetry among crossbite groups and control group. Materials and Methods: The cone-beam computed tomography scans of three groups were studied: (1) 15 patients (6 male, 9 female; mean age: 13.51 6 2.03 years) with unilateral posterior crossbite; (2) 15 patients (8 male, 7 female; mean age: 13.36 6 2.12 years) . . . with bilateral posterior crossbite; and (3) 15 patients (8 male, 7 female; mean age: 13.46 6 1.53 years) as a control group. Fourteen parameters (eight linear, three surface, and three volumetric) were measured. Side comparisons were analyzed with paired samples t-test, and for the intergroup comparison, analysis of variance (ANOVA) and Tukey tests were used at the P , .05 level. Results: According to side comparisons, no statistically significant difference was found in the UCG. There were statistically significant differences in hemimandibular (P 5 .008) and ramal (P 5 .004) volumes for the BCG and in ramal height (P 5 .024) and body length (P 5 .021) for the CG. Intergroup comparisons revealed significant differences in hemimandibular (P 5 .002) and body volume (P , .001) for the normal side of the UCG and left sides of the other groups, and in angular unit length (P 5 .025) and condylar width (P 5 .007) for the crossbite side of the UCG and the right sides of the other groups. Conclusions: Contrary to UCG, CG and BCG were found to have side-specific asymmetry. Skeletal components of the mandible have significant asymmetry among the crossbite groups and the CG Daha fazlası Daha az

TANCAN UYSAL

Makale | 2013 | American Journal of Orthodontics and Dentofacial Orthopedics

Introduction: The aim of this study was to evaluate the prevalence of bacteremia associated with an orthodontic stripping procedure. Methods: The study included 29 orthodontic patients (mean age, 18.2 6 3.4 years). We used a standardized stripping procedure: a perforated stripping disk with a contra-angle hand piece was used at a low speed (\15,000 rpm; 10 seconds) on the mandibular anterior teeth. Blood samples were collected by inserting a cannula into the left antecubital fossa. A baseline sample was taken before treatment, and a second sample was taken after the stripping procedure. These samples were inoculated into aerobi . . .c and anaerobic blood culture bottles and incubated, and the bacterial cultures were identified; the samples collected before and after the stripping procedure were statistically analyzed. Results: Transient bacteremia was not detected in any pretreatment blood sample, but it was found in 1 postoperative blood sample; this sample tested positive for Streptococcus sanguis. Conclusions: The bacterial species in the positive postoperative blood sample was S sanguis, which might be associated with infective endocarditis. Clinicians should explain the level of risk to the patient and consult a concerned medical specialist Daha fazlası Daha az

TANCAN UYSAL

Makale | 2013 | Springer

The aim of this experimental study was to evaluate the effects of light-emitting diode-mediated-photobiomodulation therapy (LPT), on the rate of orthodontic tooth movement (TM) and orthodontically induced root resorption, in rats. Twentymale 12-week-oldWistar rats were separated into two groups (control and LPT) and 50 cN of force was applied between maxillary left molar and incisor with a coil spring. In the treatment group, LPT was applied with an energy density of 20 mW/cm2 over a period of 10 consecutive days directly over the movement of the first molar teeth area. The distance between the teeth was measured with a di . . .gital caliper on days 0 (T0), 10 (T1), and 21 (T2) on dental cast models. The surface area of root resorption lacunae was measured histomorphometrically using digital photomicrographs. Mann–Whitney U and Wilcoxon tests were used for statistical evaluation at p Daha fazlası Daha az

TANCAN UYSAL |

Makale | 2012 | European Orthodontic Society

The aim of this follow-up study was to evaluate the effects of Pre-Orthodontic Trainer (POT) appliance on the anterior temporal, mental, orbicularis oris, and masseter muscles through electromyography (EMG) evaluations in subjects with Class II division 1 malocclusion and incompetent lips. Twenty patients (mean age: 9.8 ± 2.2 years) with a Class II division 1 malocclusion were treated with POT (Myofunctional Research Co., Queensland, Australia). A group of 15 subjects (mean age: 9.2 ± 0.9 years) with untreated Class II division 1 malocclusions was used as a control. EMG recordings of treatment group were taken at the beginning and a . . .t the end of the POT therapy (mean treatment period: 7.43 ± 1.06 months). Follow-up records of the control group were taken after 8 months of the first records. Recordings were taken during different oral functions: clenching, sucking, and swallowing. Statistical analyses were undertaken with Wilcoxon and Mann–Whitney U-tests. During the POT treatment, activity of anterior temporal, mental, and masseter muscles was decreased and orbicularis oris activity was increased during clenching and these differences were found statistically significant when compared to control. Orbicularis oris activity during sucking was increased in the treatment group (P < 0.05). In the control group, significant changes were determined for anterior temporal (P < 0.05) and masseter (P < 0.01) muscle at clenching and orbicularis oris (P < 0.05) muscle at swallowing during observation period. Present findings indicated that treatment with POT appliance showed a positive influence on the masticatory and perioral musculature Daha fazlası Daha az