İzmir Kâtip Çelebi Üniversitesi

Kitap | 2021 | İzmir Kâtip Çelebi Üniversitesi

Çevrimiçi (362 sayfa : şekil, tablo ; 26 cm.).

Velican ERCAN | M. Erdal ÖZBEK

Makale | 2021 | Journal of Artificial Intelligence and Data Science1 ( 1 ) , pp.28 - 34

Biometric data is the key for many security applications. Authentication relies on the individual’s measurable biometric properties collected as features. In this study, a face authentication system is built to be used in opening the entrance door accessing to the apartments and housing estates. The proposed system consists of three stages. In the first stage, landmarks on the face are captured using a deep neural network. Then six selected features from the landmarks are extracted and traditional machine learning algorithms are used to authenticate users. In the last stage, a user interface is built. Face recognition tests achieved . . . an accuracy rate of 89.79% Daha fazlası Daha az

Rumeysa KESKİN | Furkan GÜNEY | M. Erdal ÖZBEK

Makale | 2021 | Journal of Artificial Intelligence and Data Science1 ( 1 ) , pp.45 - 50

The Internet of Things (IoT) provides solutions to many daily life problems. Smartphones with user-friendly applications make use of artificial intelligence solutions offered by deep learning techniques. In this work, we provide a sustainable solution to automatically monitor and control the irrigation process for detected flowers by combining deep learning and IoT techniques. The proposed flower status tracker and self-irrigation system (FloTIS) is implemented using a cloud-based server and an Android-based application to control the status of the flower which is being monitored by the local sensor devices. The system detects chang . . .es in the moisture of the soil and provides necessary irrigation for the flower. In order to optimize the water consumption, different classification algorithms are tested. The performance comparisons of similar works for example flower case denoted higher accuracy scores. Then the best generated deep learning model is deployed into the smartphone application that detects the flower type in order to determine the amount of water required for the daily irrigation for each type of flower. In this way, the system monitors water content in the soil and performs smart utilization of water while acknowledging the user Daha fazlası Daha az

İsmail AKDAĞ

Makale | 2021 | Journal of Artificial Intelligence and Data Science

Abstract In this study, machine learning-based models have been used to estimate the return loss parameters of the operational resonant frequency of the U-slotted UHF RFID antenna. The data set utilized, consisting of 544 instances, has been collected from the simulation software as a consequence of the parametric evaluation of the antenna design parameters. Distinct machine learning methods have been used on two different types of output data, complex and linear scattering parameters, and the models' prediction performance has been evaluated. In the single-output regression models, a mean-square error value of 0.25% with an R2 valu . . .e of 95.54% was obtained with the Random Forest regression model, and a mean-square error value of 0.85% has been obtained with an R2 value of 91.32% in the multiple-output regression technique Daha fazlası Daha az

LEVENT AYDIN

Makale | 2021 | Journal of Artificial Intelligence and Data Science

Kaynakça var.

Naciye Burcu KARTAL

Makale | 2021 | Journal of Artificial Intelligence and Data Science1 ( 1 ) , pp.80 - 88

This study proposes an appropriate optimization model for determining a new composite material's mechanical properties by neuro-regression analysis. This new composite material is obtained by combining hemp and polypropylene fibers. It was developed for the sector of upholstered furniture. First, different multiple regression models have been tried for input and output values. The R2 training, R2 testing, R2 validation, and minimum, maximum values were determined for each model. Then, the stochastic optimization approach is used to predict and optimize the mechanical properties of the new biocomposite system. Finally, multiple non-l . . .inear models determine the maximum tensile strength and elongation achievable within the constraints. It is found what the optimum input parameters are needed to achieve maximum tensile strength and elongation at break values of the material and that the type of scenario and the choice of constraints for design variables are critical in the optimization problem Daha fazlası Daha az

ÖMER FARUK BÜYÜKYAVUZ

Makale | 2021 | Journal of Artificial Intelligence and Data Science1 ( 1 ) , pp.89 - 95

Wire electrical discharge machining (WEDM) of γ titanium aluminide is the subject of the current research. Due to the large number of process variables and sophisticated stochastic process mechanisms, selecting the best machining parameter combinations for increased cutting efficiency and accuracy is a difficult task in WEDM. In general, there is no perfect combination that can produce the fastest cutting speed and the finest surface finish quality at the same time. For this purpose, the data were selected from a literature study. This study describes an attempt to devise a suitable machining technique for achieving the highest poss . . .ible process criteria yield. To model the machining process, a stochastic optimization method, differential evolution, has been performed. Cutting speed, surface roughness, and wire offset are the three most important criteria that have been used as indicators of process performance. The response characteristics can be predicted as a function of six different control parameters, namely pulse on time, pulse off time, peak current, wire tension, dielectric flow rate, and servo reference voltage. The limitations of the candidate models are checked after the R 2 training, R2 testing and R2 valiadtion values are calculated to reveal whether the model is realistic. Optimization results are 3.02 mm/min, 2.36 µm, and 0.13 mm for the maximum cutting speed, the minimum surface roughness, and minimum wire offset, respectively. It is shown that the machining model is suitable and that the optimization technique meets practical requirements Daha fazlası Daha az

ŞEYDA İŞBİLİR

Makale | 2021 | Journal of Artificial Intelligence and Data Science1 ( 1 ) , pp.96 - 105

Global crises are increasing day by day due to the rapid depletion of energy supplies around the planet. One of the goals of engineering is to prevent this situation by developing innovative solutions to this rapid energy consumption that has disappeared in the world. A solution could be to reduce the energy consumption of the machines that are used during production. In this study, a new design technique based on the neuro-regression approach and non-linear regression modeling was offered as an alternative to Taguchi design to reduce energy consumption. Thus, a cutting parameter optimization model was created to examine the effects . . . of the constraint conditions on energy consumption. The cutting power, the surface roughness of the part, and tool life were handled as objective functions(constraint conditions). First of all, the multiple non-linear regression modeling was created using design variables in end milling . These design variables were determined as spindle rotational speed, feed rate power, radial cut depth, axial cut depth, and cutting speed. Then, objective functions were brought to the proper minimum optimal levels due to this optimization modeling. As a result of the optimization model built with design variables, accurate modeling was achieved in this work by studying several optimization models utilized to optimize the minimum objective functions, which play a significant role in reducing energy consumption in end milling. After the optimization, the maximum value was found as 110.791. At the end of the study, some options of direct search method to maximize and minimize results were applied Daha fazlası Daha az

LEVENT AYDIN

Makale | 2021 | Journal of Artificial Intelligence and Data Science

This study investigates the optimum weld area on a popular aerospace alloy (i.e., Inconel 825) made by the electron beam welding technique. Welding speed (S), beam current (I), accelerating voltage (V), and beam oscillation (O) are considered as process parameters to study the weld bead area (WA) of the weldments. An instructive study on multiple non-linear neural regression analyses has been done as a basic introduction to neuro regression modeling with artificial neural network (ANN) philosophy. To do this, the experimental prediction has been modeled with 14 predictive functional structures using fundamental regression modal type . . .s to test the accuracy of their predictions. To train the program with the chosen model R^2_training, test it R^2_testing, verify the accuracy R^2_validation is used, and check whether the values are within the engineering limits. Optimization algorithms with three different scenarios have been applied. Only one of the 14 models gave realistic results. It has been seen that the scenario types, selection of different constraints, and different models for design variables affect the optimization results Daha fazlası Daha az

Fatma Günseli YAŞAR ÇIKLAÇANDIR

Makale | 2021 | Journal of Artificial Intelligence and Data Science1 ( 1 ) , pp.22 - 27

Automatic systems can be used in many areas, such as the production stage in factories, country defense, and traffic control. They provide the opportunity to reach results faster with higher success rates thanks to human-computer vision cooperation. In this study, it is aimed to develop an intelligent system that automatically detects and classifies defects in fabrics. Thanks to the developed system, the cause of the malfunction is eliminated, and the recurrence of the malfunction is prevented. Using deep learning methods in fabric defect classification studies has a disadvantage compared to other methods. Multiple layers in deep le . . .arning cause a time-consuming process. Therefore, a combination of Deep Learning and Support Vector Machines (SVM) has been used in this study. The success of the provided system has been compared with other deep learning algorithms in terms of time and accuracy Daha fazlası Daha az

Ali Aycan KOLUKISA

Makale | 2021 | Journal of Artificial Intelligence and Data Science

Abstract This study is prepared to examine the effects of Turkish character usage on text data by using multiple classifiers. Regression Classifiers, SVM, NB-Classifiers, and ANN are frequently used in supervised learning methods, especially in classification problems. Regression classifiers generally come in two types: as Linear and Logistic. There are also more than one type of Naive Bayes classifier. In our study, after mentioning the properties of Linear Regression and Logistic Regression classifiers in general terms, why Logistic Regression is much more suitable for this study is explained. Then, with the usage of "Logistic Reg . . .ression", "LinearSVC", "MultinomialNB", "ComplementNB", "BernoulliNB" and "Perceptron" classifiers, the analyzing part starts. Our datasets consist of abstracts-parts from 64 Turkish articles, which have 4 different classes as Physical Sciences, Social Sciences, Educational Sciences, and Economics Administrative Sciences. The data files are all in CSV file format, however, two different data files were prepared. One with original Turkish characters, and the other with its English equivalent formation targeting the Turkish characters "Ç, ç, Ö, ö, Ü, ü, Ş, ş, İ, ı, ğ". In its English-like equivalent file, these were replaced with "C, c, O, o, U, u, S, s, I, i, g" respectively. Daha fazlası Daha az