Nanocomposites with graphene

  • Tez Danışmanı M. Özgür SEYDİBEYOĞLU
  • Tür Doktora Tezi
  • Yayın Tarihi 2018
  • Yayıncı İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü
  • Tek Biçim Adres Http://hdl.handle.net/11469/370

The carbon fiber used in the manufacturing of advanced composites has various applications in the automotive, aerospace, and electronics industry because of their comprehensive properties such as lightweight, flexibility, high strength to weight ratio, excellent chemical resistance, superior electrical conductivity and thermal conductivity.
Different kinds of carbon fiber precursors have been used and polyacrylonitrile (PAN) is the mostly utilized polymer type which is a petroleum-based, expensive and unsustainable. Remarkably, lignin is a highly accessible, low-cost, and renewable resource. Also, lignin is a byproduct of pulp and paper industry as well as cellulosic ethanol fuel production. So, the reuse of this byproduct is very significant for the bioeconomy. Accordingly, understanding the structure, types, and extraction methods of lignin are of great importance for transferring these biomass residues from a low-value material to a higher value product.
This work started with the extracted lignin from Turkish resources (Turkish Pine and Turkish Vine stem) by sulfuric acid treatment and to compare with commercial lignin. Additionally, we investigated lignin to identify its suitability as a carbon fiber precursor and to use for reducing the processing cost of carbon fiber production compared to other precursors.
In this thesis, sub-micron lignin-based nanofibers were produced by electrospinning of solutions obtained by dispersing lignin, polyacrylonitrile (PAN) and then graphene (GRP) in N, N-dimethylformamide (DMF). Lignin-based carbon nanofibers were investigated by focusing on the steps of manufacture. Resource types and corresponding pretreatments improve the processability of spinning and thermal treatments. Defect-free nanofibers with up to 5 wt. % lignin/PAN and 1% graphene were fabricated successfully. The succeeding step is the most significant process of stabilization, where nanofibers are oxidized, crosslinked, and thermally stabilized for the following step. After carbonization, lignin-based carbon nanofibers are obtained. When carbonized at 900 °C, PAN/Lignin/GRP carbon nanofiber presents carbon content of 94.3% and with average diameter ~ 100 nm. Effects of every single step on the lignin-based carbon nanofibers have been discussed comprehensively.
To sum up, the low cost of carbon nanofibers and graphene reinforced carbon nanofibers can be used in numerous fields, mainly for electronic devices containing biosensors and supercapacitors. In this thesis, the characterization of carbon nanofiber (CNF) and graphene reinforced carbon nanofiber (CNF-G) modification onto the screen printed electrode (SPE) has been verified via Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV). The charge transfer resistance, Rct values obtained by electrochemical circle fit option of EIS have been utilized for conductivity detection of modified electrodes. In the last part of this thesis, CNF and CNF-G modified electrodes were performed for an effective biosensor to detect acetaminophen.

Görüntülenme
10
02.12.2021 tarihinden bu yana
İndirme
1
02.12.2021 tarihinden bu yana
Son Erişim Tarihi
11 Aralık 2023 15:07
Google Kontrol
Tıklayınız
carbon nanofibers lignin graphene thesis lignin-based conductivity obtained nanofiber investigated production utilized Turkish significant reinforced byproduct polyacrylonitrile precursors modified thermal resistance electrodes industry PAN/Lignin/GRP Defect-free treatments spinning presents processability content improve average diameter successfully succeeding
Tam Metin
Tam Metin İndirmek için tıklayın Ön izleme
Detaylı Görünüm
Eser Adı
(dc.title)
Nanocomposites with graphene
Tez Danışmanı
(dc.contributor.advisor)
M. Özgür SEYDİBEYOĞLU
Yayıncı
(dc.publisher)
İzmir Katip Çelebi Üniversitesi Fen Bilimleri Enstitüsü
Tür
(dc.type)
Doktora Tezi
Özet
(dc.description.abstract)
The carbon fiber used in the manufacturing of advanced composites has various applications in the automotive, aerospace, and electronics industry because of their comprehensive properties such as lightweight, flexibility, high strength to weight ratio, excellent chemical resistance, superior electrical conductivity and thermal conductivity. Different kinds of carbon fiber precursors have been used and polyacrylonitrile (PAN) is the mostly utilized polymer type which is a petroleum-based, expensive and unsustainable. Remarkably, lignin is a highly accessible, low-cost, and renewable resource. Also, lignin is a byproduct of pulp and paper industry as well as cellulosic ethanol fuel production. So, the reuse of this byproduct is very significant for the bioeconomy. Accordingly, understanding the structure, types, and extraction methods of lignin are of great importance for transferring these biomass residues from a low-value material to a higher value product. This work started with the extracted lignin from Turkish resources (Turkish Pine and Turkish Vine stem) by sulfuric acid treatment and to compare with commercial lignin. Additionally, we investigated lignin to identify its suitability as a carbon fiber precursor and to use for reducing the processing cost of carbon fiber production compared to other precursors. In this thesis, sub-micron lignin-based nanofibers were produced by electrospinning of solutions obtained by dispersing lignin, polyacrylonitrile (PAN) and then graphene (GRP) in N, N-dimethylformamide (DMF). Lignin-based carbon nanofibers were investigated by focusing on the steps of manufacture. Resource types and corresponding pretreatments improve the processability of spinning and thermal treatments. Defect-free nanofibers with up to 5 wt. % lignin/PAN and 1% graphene were fabricated successfully. The succeeding step is the most significant process of stabilization, where nanofibers are oxidized, crosslinked, and thermally stabilized for the following step. After carbonization, lignin-based carbon nanofibers are obtained. When carbonized at 900 °C, PAN/Lignin/GRP carbon nanofiber presents carbon content of 94.3% and with average diameter ~ 100 nm. Effects of every single step on the lignin-based carbon nanofibers have been discussed comprehensively. To sum up, the low cost of carbon nanofibers and graphene reinforced carbon nanofibers can be used in numerous fields, mainly for electronic devices containing biosensors and supercapacitors. In this thesis, the characterization of carbon nanofiber (CNF) and graphene reinforced carbon nanofiber (CNF-G) modification onto the screen printed electrode (SPE) has been verified via Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV). The charge transfer resistance, Rct values obtained by electrochemical circle fit option of EIS have been utilized for conductivity detection of modified electrodes. In the last part of this thesis, CNF and CNF-G modified electrodes were performed for an effective biosensor to detect acetaminophen.
Kayıt Giriş Tarihi
(dc.date.accessioned)
2018-08-08T13:25:41Z
Açık Erişim Tarihi
(dc.date.available)
2018-08-08
Yayın Tarihi
(dc.date.issued)
2018
Yayın Dili
(dc.language.iso)
eng
Alternatif Yayın Başlığı
(dc.title.alternative)
Grafen esaslı nanokompozitler
Tek Biçim Adres
(dc.identifier.uri)
Http://hdl.handle.net/11469/370
Analizler
Yayın Görüntülenme
Yayın Görüntülenme
Erişilen ülkeler
Erişilen şehirler
6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve çerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.

creativecommons
Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.
Platforms